1050 / 1060 Aluminium Sheet & Coil
Commercial purity aluminium, 99.5 % / 99.6 % Al
1050 and 1060 are commercial-purity aluminium: 99.5 % and 99.6 % minimum aluminium with almost no alloying additions, which gives excellent conductivity, corrosion resistance and formability at the lowest cost per tonne of any sheet grade. They are soft — the trade-off for that formability — and are used for signage, kitchenware, insulation jacketing and general presswork.
Equivalent grades
| AA | 1050 / 1060 |
|---|---|
| EN 573-3 | EN AW-1050A / 1060 |
| JIS H4000 | A1050 / A1060 |
| GB/T 3880 | 1050 / 1060 |
ASTM B209 · EN 485
Chemical composition
| Al | Si + Fe | Cu | Mn | Mg | Zn |
|---|---|---|---|---|---|
| ≥ 99.50 (1050) | ≤ 0.45 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 | ≤ 0.05 |
| ≥ 99.60 (1060) | ≤ 0.35 | ≤ 0.05 | ≤ 0.03 | ≤ 0.03 | ≤ 0.05 |
Values in % by mass. Limits are maxima unless a range is stated.
Mechanical properties
| Temper | Rm (MPa) | Rp0.2 min (MPa) | A min (%) |
|---|---|---|---|
| O (annealed) | 60 – 95 | ≥ 15 | ≥ 25 |
| H14 | 95 – 130 | ≥ 75 | ≥ 8 |
| H24 | 105 – 145 | ≥ 85 | ≥ 6 |
Typical values per ASTM B209, EN 485. The composition and mechanical properties of your order are stated on the EN 10204 3.1 mill test certificate.
Dimensions
| Thickness / diameter (mm) | 0.20 – 6.00 |
|---|---|
| Width / size class | 1000 – 1500 |
| Length / face | coil, sheet or cut to length |
Mill finish, stucco embossed or coated · 99.5 % / 99.6 % Al · Sizes outside the ranges below are available on request — send the specification and quantity.
Typical applications
- Signage and nameplates
- Kitchenware and cookware
- Insulation jacketing and cladding
- Electrical and thermal applications
- Deep-drawn and pressed parts
How to choose
Order & delivery
| Lead time | 15 – 30 days after deposit or L/C for mill-rolled material; stock sizes ship sooner. |
|---|---|
| Packing | Steel strapping, wooden pallets or crates, edge protection, custom shipping marks. |
| Payment | T/T with deposit, or L/C at sight. Terms are confirmed on the proforma invoice. |
| Minimum order | Normally one 20′ container per size; mixed sizes can be combined in one container. |
| Documents | Invoice, packing list, bill of lading, certificate of origin, EN 10204 3.1 mill test certificate. |
| Incoterms | FOB, CFR, CIF to your port. Third-party inspection (SGS, BV, Intertek) arranged on request. |
FAQ
What is the difference between 1050 and 1060?
Which tempers do you supply?
Full range, finishes and packing: Aluminium Sheet, Coil & Extrusion →
